This page information related to Version 76 for the Cubic | Trafficware ATC controller that complies with the NEMA NTCIP 1202 versions 1 and 2. The foundation of this version is an NTCIP compliant database that is cross compatible between controllers in this version and older versions of NTCIP compliant software.
To download the latest version click here --> Current Version
To download previous releases (Use at your own risk) click here --> Previous Releases
Release Notes-
76.16.68(D) / Build 349.7 / 22 December 2020
(Limited release for NYSDOT)
Created release package that has all network services disabled.
76.16.67(C) / Build 346.5 / 07 December 2020
Fix: Controller may stop timing after terminating FYA to serve Preempt 1
Fix: Text misaligned in Spanish language screens
Misc. code changes to support upcoming V6EBOS 1.1.0(does not affect any features or functionality)
76.16.66(B) / Build 338.2 / 16 October 2020
(Limited release for Merida)
New: Language setting (MM+2+7) and control keystroke (F+9) to toggle front panel UI between Spanish and English
Improved: Behavior of Ped Overlap 1 type to follow included phase ped times instead of a hardcoded min ped clearance
76.16.65(A) / Build 284.18 / 14 September 2020
(Limited release for Miami-Dade, Las Vegas, and Council Bluffs only)
Fix: Brief display of incorrect signal indications when exiting Model 33x cabinet flash
New: Pedestrian Call override setting
Improved: behavior of advance warning beacons during preemption, FYA, and coordination
Fix: Cabinet status alternates between “OK” and “Red Fail” once per second during pedestrian change interval (flashing don’t walk) when outputting FYA on pedestrian yellow with an EDI MMU
76.15.90(Z) / Build 283.17 / 27 April 2020
Fix: ASYNC Bindings not working correctly when programmed for GPS
Improved: Behavior of FYA with multiple included phases across barriers improved to meet expected behavior
Fix: TSP Alarms not being reported
76.15.89(Y) / Build 282.16 / 30 March 2020
Fix: FYA behavior with multiple preemptions and min green times for these preemptions
Fix: Time of day clock loses time on ATC v6 engine boards
Fix: Run Timer can be toggled without entering Access CodeImprovements to license modification and removal workflow on 980 ATC
Fix: Purdue logging update for Ped Extend and Red Extend and now up to 24 hours selectable
New: high-resolution data logging enumerations and alarms for Ped Extend and Red Extend
Improved: J2735 SPaT messages
76.15.88(X) / Build 280.14 / 12 February 2020
New: setting for Ethernet link speed(MM-6-5)
76.15.87(W) / Build 278.12 / 31 October 2019
New: Ability to activate low priority preemption via SNMP
Enhancement: SNMP high priority preemption now supports all 12 preempts(previously limited to 6)
Fix: SPaT messages could fail under certain sequences
Fix: Minor corrections and enhancements to the SAE J2735 SPaT message, affecting times when the controller is dwelling in green with no conflicting demand
Fix: Some older 2070-1BCPUscould lose Ethernet functionality after installing a firmware update
Enhancement: Support Model 170 controllers
Fix: NTCIP phaseStatusGroupWalk and phaseStatusGroupDontWalkobjects
76.15.85(U) / Build 265.9 / 18 July 2019
- If a UDP packet of size 0 size is received, the controller discards the packet(s) and records the event in the sysmgrlog. In previous versions, receipt of erroneous UDP packets of 0 size could disable SNMP and DSRC communications.
- When programming a Conflicting Ped Phase with a FYA overlap, the following message is displayed “Warning: Not recommended for use with FYA without also enabling FYARedB4Ped.” For additional information, refer to the FYARedB4Ped section in the User Manual.
- When entering a preempt, any active overlaps extend green for 1s to prevent the output from going green>yellow>red>green. FYA is now an exception to this and the overlap terminates with the included phase.
- On Linux based controllers, if a database has been backed up to flash, it is preserved when installing a software update.
- Minor corrections and enhancements have been made to the SAE J2735 SPaT message.
- Correction has been made to STMP dynamic object 2.
- Correction has been made to the ascBlockData and moduleDeviceNode MIBs.
76.15.84(T) / Build 6970 / 28 February 2019
- Transit Priority Module has been enhanced to provide smoother functionality and eliminate skipped phases. Refer to the Operations Manual for Transit/Light Rail Priority for additional details.
- When running on a Safetran 2070-1E, the database can now be backed up.
76.15.83(S) / Build 6924 / 27 December 2018
- The SPaT (Signal Phase and Timing) message for use with DSRC can now be sent in either the SAE J2735 format or the previously used Trafficware format.
76.15.82(R) / Build 6911 / 14 December 2018
- A correction was made to the FYA functionality to delay the FYA operation when the conflicting pedestrian phase was active after exiting preemption.
- A correction was applied to the FYAGapExt function. The timer now operates like a typical extension timer, so that that the time between consecutive actuations on the FYAGapDet(s) must exceed the programmed FYAGapExt time before the FYA will begin.
- SPaT messages may now be transmitted in either the SAE J2735 format or the previously supported Trafficware format.
- Corrections have been made to Initialization Modes ‘NYSDOT 0’ and ‘NYSDOT 8’ so they now include the following assignments:
- O5-1 28 Ch4 Yellow
- O5-2 34 Ch10 Yellow
- O5-3 25 Ch1 Yellow
- O5-4 31 Ch7 Yellow
- O5-5 115 Not Used
- O5-6 115 Not Used
- O5-7 115 Not Used
- O5-8 114 Watchdog
- O6-1 115 Not Used
- O6-2 115 Not Used
- O6-3 13 Ch13 Red
- O6-4 37 Ch13 Yellow
- O6-5 61 Ch13 Green
- O6-6 14 Ch14 Red
- O6-7 38 Ch14 Yellow
- O6-8 62 Ch14 Green
- Initialization Modes ‘NYSDOT 0’ and ‘NYSDOT 8’ now include outputs for channels 15 and 16.
76.15.81(Q) / Build 6843 / 15 October 2018
- Modified FYARedOnRest functionality so that during coordination there is now a "FYA Walk Recycle Window" that will be used to define a specific part of the cycle when the intersection is allowed to begin Red Revert in order to terminate an active FYA to serve a pedestrian call.
- Enhanced Trafficware SPaT message to include Time To Change for each phase, pedestrian, and overlap
76.15.80(M) / Build 6778 / 6 September 2018
- On startup, communication must be established with any critical BIUs before exiting flash.
- Enhancements have been made to increase GPS reliability. Added interface software to support ASI (Adaptive Solutions,Inc), Intelight, and McCain GPS devices as well as supporting the 2070-7T or 2070-7G GPS interface cards.
- A new SNMP object has been added containing detector counts.
- ‘Cycle Fault Action’ in MM-1-2-1 has been changed to ‘Cycle Failure Action’ to more accurately describe the function.
76.15.72(H) / Build6644 / 28 June 2018
- Various FYA updates including: New FYARedOnRest feature.
- Added new feature so that FYA operation can be controlled by a FYA gap detector.
- Resolving FYA locking issue.
- Resolving FYA output issue when using a yellow flash startup.
- Resolved FYA issue such that it will terminate to red when a conflicting Ped call is present.
- Modifying the FYA overlap to always follow included phase clearance time following protected arrow.
- Modifying the FYA overlap such that Overlap Lock Inhibit should always be off for the first clearance interval.
- Changed FYA conflicting behavior to terminate the phase before returning to service after a conflicting pedestrian Allow the overlap to have the minimum yellow time be programmed to less than 3 seconds.
- Modified IO Mode initialization issues when mapping the 2A hardware for Mode 0 and Mode 1 selections. Modifications to Linux OS controller licensing when removing/modifying the existing license.
- Modifications to background NTCIP diagnostics and communications.
- Resolved initialization diagnostics and database verification inconsistencies.
- Resolved various screen typographic issues.
- Transit Priority Module modifications for extending the transit phase.
- DSRC module enhancements.