• NEW: Occupancy Based Outputs.  Zones can now be configured to trigger outputs based on occupancy.
  • NEW: Add support for the Axis M7011 encoder for use with Rectilinear IR  cameras
  • IMPROVEMENT: Simplified  setting outputs on TS2 and ITS. BIUs and SIUs were removed from Control  Settings and are now implicitly set when configuring outputs.
  • IMPROVEMENT: Improved Camera  Discovery. Addressed slow camera boot issues by using a new discovery process.
  • IMPROVEMENT: Camera LEDs have  been changed for clarity. The first Camera LED now indicates the status of  configured cameras: Searching (flashing Amber), Missing any camera (flashing  Red), All Online (solid Green). The second Camera LED now indicates whether  there are new cameras (solid Green) or no new cameras (off).
  • IMPROVEMENT: Modified camera control to brighten dark zones while  simultaneously avoiding the saturation of well-lit image regions.
  • IMPROVEMENT: Only configured  outputs are activated during Recall.
  • IMPROVEMENT: Improved the  speed of reboots on GS2s.
  • FIX: Resolved issue ( https://support.gridsmart.com/discussions/topics/27000001089 )  where systems connected to networks with AXIS cameras could get overwhelmed  trying to resolve those cameras.
  • FIX: Resolved issue ( https://support.gridsmart.com/discussions/topics/27000001049 )  where, in some cases, connectivity to a Site would appear to flash on and  off.
  • FIX: Resolves issue ( https://support.gridsmart.com/discussions/topics/27000001030 )  where the Engine could restart when the system time was updated by 10 seconds  or more.
  • FIX: Resolves issue ( https://support.gridsmart.com/support/discussions/topics/27000001132 ) The Client should no longer get hung on the Loading screen  due to a corrupt settings file.
  • FIX: Resolved bug (https://support.gridsmart.com/support/discussions/topics/27000001128 ) where a missing postal code could prevent the Info dialog  and Site Settings from opening.
  • FIX: Resolved bug (https://support.gridsmart.com/support/discussions/topics/27000001106) where pedestrian zone states were not being logged to the  zone states data files appropriately. 
  • CHANGE: Full PDF user guide  in client replaces the now deprecated HTML user guide. The online user guide  and support is now handled through support.gridsmart.com.
  • CHANGE: Only sites connected  over the processors local port will be automatically discovered by the Client.  Sites on a network must be connected to by manually entering the IP.